74F821SPC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Supplier Device Package | 24-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 150MHz |
| Base Part Number | 74F821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 10 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 10 |
| Clock Frequency | 150MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 6.4 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F821SPC Overview
The package is in the form of 24-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. Temperature is set to 0°C~70°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 74F series. It should not exceed 150MHzin terms of its output frequency. There are 1 elements in it. As a result, it consumes 100mA quiescent current and is not affected by external forces. This D latch belongs to the family of 74F821. There is an electronic component mounted in the way of Through Hole. With its 24pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. It is designed with a number of bits of 10. Using 10 circuits, it is highly flexible. Optimal efficiency requires a supply voltage of 5V. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As of now, there are 1input lines. -3mAis set as the high level output current. Low level output current is set to 24mA. There should be a temperature below 70°Cduring operation. In order for the system to operate properly, the temperature should be higher than 0°C. A minimum supply voltage of 4.5V is required for these RS flip flops to operate. There is a maximum supply voltage of 5.5V. The frequency can be set to 150MHz.
74F821SPC Features
Tube package
74F series
24 pins
10 Bits
74F821SPC Applications
There are a lot of ON Semiconductor 74F821SPC Flip Flops applications.
- Latch-up performance
- Consumer
- Data Synchronizers
- Clock pulse
- Parallel data storage
- Instrumentation
- Single Up Count-Control Line
- Computers
- Computing
- Cold spare funcion
