74F825SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 160MHz |
| Base Part Number | 74F825 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 90mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F825SCX Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. It is included in the package Tape & Reel (TR). This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74F series. Its output frequency should not exceed 160MHz Hz. There are 1 elements in it. As a result, it consumes 90mA of quiescent current without being affected by external factors. The 74F825family includes it. It is mounted in the way of Surface Mount. A total of 24pins are provided on this board. It has a clock edge trigger type of Positive Edge. 8bits are used in its design. The superior flexibility of this product is achieved by using 8 circuits. Optimal efficiency requires a supply voltage of 5V. To operate, the chip has a total of 1 output lines. A total of 2input lines have been provided. -3mA is set as the high level output current. It is set to 24mAfor low level output current. Temperatures below 70°Care ideal for operating. The operating temperature should be higher than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis its maximum supply voltage. 160MHzis the maximum frequency that can be achieved.
74F825SCX Features
Tape & Reel (TR) package
74F series
24 pins
8 Bits
74F825SCX Applications
There are a lot of ON Semiconductor 74F825SCX Flip Flops applications.
- Dynamic threshold performance
- Convert a momentary switch to a toggle switch
- Digital electronics systems
- Data storage
- Instrumentation
- ESCC
- Balanced Propagation Delays
- Computers
- Safety Clamp
- Single Up Count-Control Line
