Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
48 |
Weight |
223.195796mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74FCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74FCT162373 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
1 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
16.5mA |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
5.2 ns |
Quiescent Current |
500μA |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW/HIGH |
Power Supply Current-Max (ICC) |
0.5mA |
Independent Circuits |
2 |
Number of Output Lines |
16 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
12.5mm |
Width |
6.1mm |
Thickness |
1.15mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74FCT162373ATPACT Overview
The 48-TFSOP (0.240, 6.10mm Width) package contains it. It is packaged in the way of Cut Tape (CT). In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. It is -40°C~85°C at the operating temperature. The 74FCT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. In this device, there are 48 terminations. There is no doubt that it belongs to the family 74FCT162373. In order to function, the supply voltage should be set to 5V. It is equipped with 48 pin count. This electronic device belongs to the family of FCT. The pin configuration of the device is 48. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. The system is powered by 5V sources. On the basis of its reliability, this device is well suited for TR. Its 24mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 16 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 500μA of quiescent current without being affected by outside factors. 1 circuits are used to achieve superior flexibility. When the maximum power current (ICC) is supplied for its operation, it reaches 0.5mA.
74FCT162373ATPACT Features
48-TFSOP (0.240, 6.10mm Width) package
74FCT series
8 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
74FCT162373ATPACT Applications
There are a lot of Texas Instruments 74FCT162373ATPACT Latches applications.
- Multistage ripple counting
- OC-48 communication systems
- Display driver
- PCs and Notebooks
- Parallel Input
- Counting
- Serial Input
- Pseudo-random code generators
- General-Purpose Register
- Flip-flops