74FCT162373ATPAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162373ATPAG8 Overview
The package in which it is embedded is named TSSOP. With this electronic part, there are 16 bits. A device with this design has 48 terminations. In order to operate it, the supply voltage must be 5V. It is equipped with 48 pin count. In the world of electronics, this electronic device belongs to the family of FCT. 48 pins are used in its design. It is mounted according to the Surface Mount method. This device has 2 ports that can be connected to it. The part belongs to the FF/Latches subcategory. A total of 5V power supplies are required for it to operate. Based on its reliable performance, this device is appropriate for TAPE AND REEL. The supply voltage should be maintained at 5V for high efficiency. There is 24mA low level output current set. 24mA is the high level output current. The operating temperature should be lower than 85°C. It is recommended to operate at a temperature higher than -40°C. Voltages up to 5.5V can be supplied. With a voltage of 4.5V, it operates at its minimum capacity. A logic IC that is used in this application is BUS DRIVER.
74FCT162373ATPAG8 Features
TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT162373ATPAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373ATPAG8 Latches applications.
- Shift register
- Motor Drives
- Clocks
- Display driver
- Parallel Output
- Shift Registers
- Shift right with parallel loading
- Buffer/Storage Registers
- Up/down difference counting
- Serial Output Register
