74FCT162373ATPVCG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74FCT162373ATPVCG4 Overview
In the package 48-BSSOP (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tube. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. 74FCT is the series number of this FPGA. The design of this electronic part is based on 16 bits. This device is designed with 48 terminations. The family 74FCT162373 includes it. A 5V voltage supply is required for operation. There are 48 pins attached to it. FCT is the family of this electronic device. There are 48 pins on it. Surface Mount is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. The output current of 24mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 16 output lines. As far as external factors are concerned, it consumes 5μA of quiescent current without getting affected by them. In total, it has 2 elements. The maximal power current (ICC) supplied for its operation reaches 0.5mA.
74FCT162373ATPVCG4 Features
48-BSSOP (0.295, 7.50mm Width) package
74FCT series
16 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
2 elements
74FCT162373ATPVCG4 Applications
There are a lot of Texas Instruments 74FCT162373ATPVCG4 Latches applications.
- Motor Drives
- Parallel data storage
- Registers
- Phase comparator
- Shift right with parallel loading
- Sample and hold register
- Hammer Device Information
- Programmable binary
- Pattern generators
- Shift left with parallel loading
