74FCT162373ATPVCT
| Parameters | |
|---|---|
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
74FCT162373ATPVCT Overview
In the package 48-BSSOP (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tape & Reel (TR). There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 4.5V~5.5V. There is -40°C~85°C operating temperature. The 74FCT series of FPGAs is the one this FPGA belongs to. The electronic part in this image has 16 bits. In this device, there are 48 terminations. This type belongs to the 74FCT162373 family. In order to function, the supply voltage should be set to 5V. 48 pins are provided. This electronic device is categorized as a FCT electronic device. With the design of the board, there are only 48 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. This part can be found within the Bus Driver/Transceiver subcategory. The device is powered by 5V power supplies. As a result of its reliable performance, it is well suited for TR. With an output current of 24mA, it is highly flexible in terms of design. High efficiency requires maintaining the supply voltage at 5V. 16 output lines generate the binary equivalent of the input lines. Without external influences, it consumes 5μA quiescent current. A total of 2 elements are contained in it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.5mA.
74FCT162373ATPVCT Features
48-BSSOP (0.295, 7.50mm Width) package
74FCT series
16 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
2 elements
74FCT162373ATPVCT Applications
There are a lot of Texas Instruments 74FCT162373ATPVCT Latches applications.
- Parallel data storage
- BCD counting
- Parallel Input
- Automotive Infotainment
- Relay replacement
- Programmable binary
- Timers
- Shift Registers
- Multi-line decoders
- Pseudo-random code generators
