Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
48 |
Packaging |
Rail/Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
48 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
16 |
Propagation Delay |
8.5 ns |
Turn On Delay Time |
1.5 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Independent Circuits |
2 |
Length |
15.9mm |
Width |
7.5mm |
Thickness |
2.3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74FCT162373ATPVG Overview
In the SSOP package, it can be found as an embedded module. As a result, it has a packaging of Rail/Tube. The design of this electronic part contains 16 bits. As far as this device is concerned, it has no terminations. The device is operated when the supply voltage is set to 5V. With 48 pins, it is equipped. It is a member of the FCT family of electronic devices. 48 pins are used in its design. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. The device is powered by 5V power supplies. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 24mA represents the low level output current. There is -24mA high level output current set. Lower than 85°C is the recommended operating temperature. There should be a temperature above -40°C at which the device operates. The supply voltage is limited to 5.5V. There is a minimum supply voltage of 4.5V for it. It uses the logic IC BUS DRIVER.
74FCT162373ATPVG Features
SSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT162373ATPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373ATPVG Latches applications.
- Relay
- Buffer/Storage Registers
- Digital bus buffer
- Decade counting 7-segment decimal display
- Avionics
- Clocks
- Shift left register
- Storage
- Double bus register system
- Pattern generators