74FCT162373ATPVG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162373ATPVG8 Overview
The package in which it is embedded is named SSOP. As a result, it has a packaging of Tape & Reel (TR). An electronic part with 16 bits is designed. A device such as this has 48 terminations designed. With a supply voltage of 5V, it operates. 48 pins are included. FCT is the family name of this electronic device. The device has 48 pins. This electronic part is mounted in the way of Surface Mount. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. The system is powered by 5V sources. The reliability of this device makes it well suited to TAPE AND REEL. High efficiency requires a voltage supply of 5V. 24mA is the low level output current. 24mA is the high level output current. Ideally, the operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. The maximum supply voltage is 5.5V. The minimal voltage for operation is 4.5V. A logic IC that is used in this application is BUS DRIVER.
74FCT162373ATPVG8 Features
SSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT162373ATPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373ATPVG8 Latches applications.
- Buffer/Storage Registers
- Parallel data storage
- Shift left register
- Display driver
- Shift register
- Serial Output Register
- Relay replacement
- Network Switches
- Motor Drives
- Meter applications
