74FCT162373CTPACT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 16 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74FCT162373CTPACT Overview
48-TFSOP (0.240, 6.10mm Width) contains it. Packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74FCT series of FPGAs is the one this FPGA belongs to. This electronic part is designed with 16 Bits. This device has been designed with 48 terminations available. The family 74FCT162373 includes it. It operates with a supply voltage of 5V. 48 pins are available on it. This electronic device is categorized as a FCT electronic device. The device has 48 pins. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. In the subcategory FF/Latches, this part belongs. There are 5V power supplies required for this machine to operate. On the basis of its reliability, this device is well suited for TAPE AND REEL. Its output current of 24mA ensures maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Input lines are converted into binary equivalents by 16 output lines. A total of 2 elements are contained in it.
74FCT162373CTPACT Features
48-TFSOP (0.240, 6.10mm Width) package
74FCT series
16 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
2 elements
74FCT162373CTPACT Applications
There are a lot of Texas Instruments 74FCT162373CTPACT Latches applications.
- Bus system register with enable parallel lines at bus side
- Stacked or Push-Down Registers
- A/D converters
- Buffer Storage
- TV Set-top Boxes
- Avionics
- Digital bus buffer
- Serial Input
- Motor Drives
- Parallel data storage
