74FCT162373CTPAG
| Parameters | |
|---|---|
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
74FCT162373CTPAG Overview
A package called TSSOP contains it. The design of this electronic part is based on 16 bits. This device has been designed with 48 terminations available. With the supply voltage set at 5V, it is able to operate. 48 pins are included. FCT is the family name of this electronic device. 48 pins are used in its design. It is mounted according to the Surface Mount method. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. In order to achieve high efficiency, the supply voltage should be kept at 5V. 24mA is set as the low level output current. The high level output current is set to 24mA. Lower than 85°C is the recommended operating temperature. It is recommended to operate at a temperature higher than -40°C. It supports the maximal supply voltage of 5.5V. With a voltage of 4.5V, it operates at its minimum capacity. The logic IC it adopts is BUS DRIVER.
74FCT162373CTPAG Features
TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT162373CTPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373CTPAG Latches applications.
- Parallel data storage
- Shift register
- Shift left register
- Frequency
- Timers
- Four-bit storage with output enable
- A/D converters
- TV Set-top Boxes
- Sample and hold register
- Shift Registers
