74FCT162373CTPAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162373CTPAG8 Overview
It is embedded in the TSSOP package. Tape & Reel (TR) is the way it is packaged. This electronic part is designed with 16 Bits. In this device, there are 48 terminations. A 5V voltage supply is required for operation. 48 pins are available on it. FCT is the family of this electronic device. It is designed with 48 pins. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. Subcategory FF/Latches includes this part. The system is powered by 5V sources. As a result of its reliable performance, it is well suited for TAPE AND REEL. High efficiency requires maintaining the supply voltage at 5V. There is 24mA output current at the low level. In the high level output current, the value is set to 24mA. There should be a temperature below 85°C at which the system is operating. The operating temperature should be higher than -40°C. Voltages up to 5.5V can be supplied. The minimal supply voltage is 4.5V. BUS DRIVER is the logic IC it uses.
74FCT162373CTPAG8 Features
TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT162373CTPAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373CTPAG8 Latches applications.
- Serial Output Data Queuing
- Pattern Generators
- Relay replacement
- Display driver
- Automotive HEV/EV Powertrain
- Digital bus buffer
- Shift right with parallel loading
- Accumulator Registers
- Up-Down Johnson
- Registers
