banner_page

74FCT162373CTPVCG4

D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74FCT162373CTPVCG4
  • Package: SSOP
  • Datasheet: -
  • Stock: 822
  • Description: D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Contact Plating Gold
Mount Surface Mount
Package / Case SSOP
Number of Pins 48
Weight 600.301152mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TUBE
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Frequency 1MHz
Pin Count 48
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 16.5mA
Current - Output 24mA
Number of Bits 8
Propagation Delay 4.2 ns
Quiescent Current 500μA
Turn On Delay Time 2 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Logic IC Type BUS DRIVER
High Level Output Current -24mA
Low Level Output Current 32mA
Number of Input Lines 16
Independent Circuits 2
Length 15.875mm
Width 7.49mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT162373CTPVCG4 Overview


The package in which it is embedded is named SSOP. There are 8 bits in this electronic part. In this device, there are 48 terminations. With the supply voltage set at 5V, it is able to operate. 48 pins are available on it. There is a device in this electronic family called FCT. With the design of the board, there are only 48 pins. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are required for it to operate. Electronic circuits are represented by 16 input lines. Based on its reliable performance, this device is well suited to TUBE. For maximum efficiency, the supply voltage should be set to 5V. The current consumed by the device is 500μA volts in quiescent mode, which cannot be affected by external factors. There is 32mA low level output current set. -24mA is the high level output current. Lower than 85°C is the recommended operating temperature. There should be a temperature above -40°C at which the device operates. There is a maximum supply voltage of 5.5V supported by this device. A minimal voltage of 4.5V is needed to operate it. It uses the logic IC BUS DRIVER. With 24mA, maximum design flexibility is ensured.

74FCT162373CTPVCG4 Features


SSOP package
8 Bits
48 pin count
48 pins
5V power supplies

74FCT162373CTPVCG4 Applications


There are a lot of Texas Instruments 74FCT162373CTPVCG4 Latches applications.

  • Decade counting 7-segment decimal display
  • Automotive Cluster
  • Flip-flops
  • Clocks
  • Audio and video switching
  • Stacked or Push-Down Registers
  • Pseudo-random code generators
  • Phase comparator
  • Automotive Body Electronics
  • High-speed logic

Write a review

Note: HTML is not translated!
    Bad           Good