74FCT162373CTPVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Inverting, Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 5μA |
| Number of Bits | 8 |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162373CTPVG Overview
There is an embedded version of it in package SSOP. Electronic parts with 8 bits are designed for this application. In this device, there are 48 terminations that have been designed. The device works with a voltage of 5V for its supply voltage. There are 48 pins attached to it. FCT is the family name of this electronic device. The pin configuration of the device is 48. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. FF/Latches is the subcategory of this part. There are 5V power supplies required for this machine to operate. An electronic circuit can be found on 16 input lines. High efficiency requires maintaining the supply voltage at 5V. 1 circuits enable it to achieve high performance. It has been set to 24mA for the low level output current. There is 24mA output current at the high level. Ideally, the temperature should not be higher than 85°C. The operating temperature should be higher than -40°C. It supports a maximum supply voltage of 5.5V. It operates with the minimal supply voltage of 4.5V. It uses a logic IC of type BUS DRIVER.
74FCT162373CTPVG Features
SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
74FCT162373CTPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373CTPVG Latches applications.
- Automotive Infotainment
- Accumulator Registers
- Bus system register with enable parallel lines at bus side
- Hammer
- Relay replacement
- Ring counter
- Network Switches
- Avionics
- Watches
- Parallel Output
