banner_page

74FCT162373CTPVG8

D-Type, Latch 16 Bits Latches 48 Pins DUAL CMOS SSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT162373CTPVG8
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 667
  • Description: D-Type, Latch 16 Bits Latches 48 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case SSOP
Number of Pins 48
Packaging Tape & Reel (TR)
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 48
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 16
Propagation Delay 5.5 ns
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Logic IC Type BUS DRIVER
High Level Output Current 24mA
Low Level Output Current 24mA
Independent Circuits 2
Length 15.9mm
Width 7.5mm
Thickness 2.3mm
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT162373CTPVG8 Overview


In the SSOP package, it is embedded. A Tape & Reel (TR) package is used to package it. This electronic part is designed with 16 Bits. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device works with a voltage of 5V for its supply voltage. There are 48 pins attached to it. There is a device in this electronic family called FCT. Designed with 48 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. There is a subcategory of FF/Latches for this part. There are 5V power supplies attached to it. As a result of its reliable performance, it is well suited for TAPE AND REEL. High efficiency requires a supply voltage of 5V. There is 24mA low level output current set. There is 24mA output current at the high level. The operating temperature should be lower than 85°C. Temperatures above -40°C should be used. It supports the maximal supply voltage of 5.5V. In order for the machine to operate, the supply voltage must be 4.5V. There is a logic IC BUS DRIVER used in the system.

74FCT162373CTPVG8 Features


SSOP package
16 Bits
48 pin count
48 pins
5V power supplies

74FCT162373CTPVG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT162373CTPVG8 Latches applications.

  • Counter
  • Buffer/Storage Registers
  • Shift right register
  • Serial Output Register
  • Parallel data storage
  • Up-Down Johnson
  • Automatic test equipment
  • Communication systems
  • Counter timers
  • Parallel-to-Serial Data Conversion

Write a review

Note: HTML is not translated!
    Bad           Good