74FCT162373ETPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 4.4 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 3.4 ns |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Height | 1mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162373ETPAG Overview
There is an embedded version of it in package TSSOP. The design of this electronic part is based on 16 bits. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With a supply voltage of 5V, it operates. 48 pins are available on it. It is a member of the FCT family of electronic devices. This board has 48 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. A total of 5V power supplies are required for it to operate. High efficiency requires a supply voltage of 5V. It is set to zero for the low level output current. There is 24mA output current at the high level. It is recommended to work at a temperature lower than 85°C. The operating temperature should be higher than -40°C. It is capable of providing a maximum supply voltage of 5.5V. The minimal voltage for operation is 4.5V. It uses the logic IC BUS DRIVER.
74FCT162373ETPAG Features
TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT162373ETPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373ETPAG Latches applications.
- Avionics
- Motor Drives
- Automotive Infotainment
- Network Switches
- Bus system register with enable parallel lines at bus side
- Parallel-to-Serial Data Conversion
- Hammer
- Serial Input
- Display
- Data acquisition
