banner_page

74FCT162373ETPAG8

D-Type, Latch 16 Bits Latches 48 Pins DUAL CMOS TSSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT162373ETPAG8
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 957
  • Description: D-Type, Latch 16 Bits Latches 48 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case TSSOP
Number of Pins 48
Packaging Tape & Reel (TR)
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 48
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 16
Propagation Delay 4.4 ns
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Logic IC Type BUS DRIVER
Prop. Delay@Nom-Sup 3.4 ns
High Level Output Current 24mA
Low Level Output Current 24mA
Independent Circuits 2
Height 1mm
Length 12.5mm
Width 6.1mm
Thickness 1mm
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT162373ETPAG8 Overview


TSSOP contains it. As a result, it has a packaging of Tape & Reel (TR). There are 16 bits in this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. In order to function, the supply voltage should be set to 5V. There are 48 pins on it. It is part of the family of electronic devices called FCT. The device has 48 pins. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. The part is in the FF/Latches subcategory. 5V power supplies are needed to operate it. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. The supply voltage should be maintained at 5V for high efficiency. In the low level output current, the value is set to 24mA. There is 24mA high level output current set. There should be a temperature below 85°C at which the system is operating. The operating temperature should be higher than -40°C. There is a maximum supply voltage of 5.5V supported by this device. The minimal supply voltage is 4.5V. The logic IC it adopts is BUS DRIVER.

74FCT162373ETPAG8 Features


TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies

74FCT162373ETPAG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT162373ETPAG8 Latches applications.

  • Automotive Body Electronics
  • Programmable binary
  • Control circuits
  • Timers
  • Relay replacement
  • Instrumentation
  • Buffer register
  • Bus system register with enable parallel lines at bus side
  • Sample and hold register
  • A/D converters

Write a review

Note: HTML is not translated!
    Bad           Good