banner_page

74FCT162374ATPVCT

4.5V~5.5V 16 Bit D-Type Flip Flop DUAL 74FCT162374 48 Pins 500μA 74FCT Series 48-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74FCT162374ATPVCT
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 607
  • Description: 4.5V~5.5V 16 Bit D-Type Flip Flop DUAL 74FCT162374 48 Pins 500μA 74FCT Series 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Weight 600.301152mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Series 74FCT
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Type D-Type
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number 74FCT162374
Function Standard
Output Type Tri-State, Non-Inverted
Operating Supply Voltage 5V
Number of Elements 2
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 1
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 16
Propagation Delay 6.5 ns
Turn On Delay Time 2 ns
Family FCT
Current - Quiescent (Iq) 500μA
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 24mA 24mA
Trigger Type Positive Edge
Input Capacitance 4.5pF
Number of Output Lines 8
Clock Edge Trigger Type Positive Edge
Width 7.49mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

74FCT162374ATPVCT Overview


The package is in the form of 48-BSSOP (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74FCTseries contain this type of chip. The list contains 2 elements. There is a consumption of 500μAof quiescent energy. 48terminations have occurred. The 74FCT162374 family contains it. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 4.5pF farads. An electronic device belonging to the family FCTcan be found here. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 48. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. The flip flop is designed with 16bits. 1 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. The flip flop contains 2ports. The supply voltage should be maintained at 5V for high efficiency. This T flip flop features a maximum design flexibility due to its output current of 24mA. There are 8 output lines in this JK flip flop.

74FCT162374ATPVCT Features


Tape & Reel (TR) package
74FCT series
48 pins
16 Bits
5V power supplies

74FCT162374ATPVCT Applications


There are a lot of Texas Instruments 74FCT162374ATPVCT Flip Flops applications.

  • Synchronous counter
  • Storage Registers
  • Single Down Count-Control Line
  • Storage registers
  • Memory
  • Single Up Count-Control Line
  • Test & Measurement
  • Event Detectors
  • High Performance Logic for test systems
  • QML qualified product

Write a review

Note: HTML is not translated!
    Bad           Good