74FCT162374ATPVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162374ATPVG Overview
SSOPis the packaging method. There are 2 elements in it. The number of terminations is 48. It is powered by a voltage of 5V . Electronic devices of this type belong to the FCTfamily. There is an electronic part that is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. 16bits are used in its design. The D latch operates on 5V volts. This flip flop has a total of 2ports. The supply voltage should be maintained at 5V for high efficiency. This D latch consumes 500μA quiescent current at all. -24mAis set as the high level output current. In the low level output current setting, 24mAis used. It is recommended that the operating temperature be lower than 85°C. Ideally, the operating temperature should be higher than -40°C. It is powered by 4.5V as its minimum supply voltage. There is a maximum supply voltage of 5.5V. The logic IC it adopts is BUS DRIVER. The T flip flop is equipped with 2functions . A total of 48 pins are present on this device.
74FCT162374ATPVG Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT162374ATPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162374ATPVG Flip Flops applications.
- Bounce elimination switch
- Latch
- Frequency Divider circuits
- Single Up Count-Control Line
- Event Detectors
- Pattern generators
- Guaranteed simultaneous switching noise level
- Set-reset capability
- Control circuits
- Latch-up performance
