74FCT162374CTPACT
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
74FCT162374CTPACT Overview
The item is packaged in 48-TFSOP (0.240, 6.10mm Width)cases. The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. A supply voltage of 4.5V~5.5V is required for operation. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. A total of 2elements are present in it. This process consumes 500μA quiescents. Terminations are 48. The 74FCT162374 family contains it. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 4.5pF farads. FCTis the family of this D flip flop. It is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 16bits has been designed. The superior flexibility of this product is achieved by using 1 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. There are 5V power supplies attached to it. There are 2 ports embedded in the flip flops. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. It operates with 8 output lines. It consumes a total of 5μA quiescent current at any given time.
74FCT162374CTPACT Features
Tape & Reel (TR) package
74FCT series
48 pins
16 Bits
5V power supplies
74FCT162374CTPACT Applications
There are a lot of Texas Instruments 74FCT162374CTPACT Flip Flops applications.
- Balanced Propagation Delays
- Storage Registers
- Pattern generators
- Divide a clock signal by 2 or 4
- Single Up Count-Control Line
- High Performance Logic for test systems
- Data storage
- Balanced 24 mA output drivers
- Dynamic threshold performance
- Buffered Clock
