74FCT162374CTPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162374CTPAG Overview
It is embeded in TSSOP case. A total of 2 elements are present. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered by a voltage of 5V . An electronic device belonging to the family FCTcan be found here. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 16 Bits. It operates from 5V power supplies. A total of 2ports are embedded in the D flip flop. If high efficiency is desired, the supply voltage should be kept at 5V. It consumes a total of 500μA quiescent current at any given time. -24mAis the output current at high level. A 24mAvalue is set for low-level output current. Ideally, the operating temperature should be below 85°C. Operating temperatures should be above -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. 5.5Vis the maximum supply voltage supported by it. There is a logic IC BUS DRIVER used in the D flip flop. A total of 2 functions are provided by this T flip flop. It is equipped with 48 pin count.
74FCT162374CTPAG Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT162374CTPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162374CTPAG Flip Flops applications.
- Supports Live Insertion
- Asynchronous counter
- Balanced Propagation Delays
- Storage registers
- Memory
- Individual Asynchronous Resets
- Frequency division
- Set-reset capability
- Memory
- Parallel data storage
