74FCT162374CTPVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162374CTPVG Overview
The flip flop is packaged in a case of SSOP. In total, it contains 2 elements. A total of 48 terminations have been made. The D flip flop is powered by a voltage of 5V . An electronic device belonging to the family FCTcan be found here. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 16. The system runs on a power supply of 5V watts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be kept at 5V. It consumes a total of 500μA quiescent current at any given time. It is set to -24mAfor the high level output current. There is 24mA output current at the low level. It is recommended that the operating temperature be below 85°C. It is recommended that the operating temperature is higher than -40°C. The minimum voltage required for operation is 4.5V. It supports the maximal supply voltage of 5.5V. It uses a logic IC with a BUS DRIVER value. It has 2 functions. 48pins are available on this JK flip flop.
74FCT162374CTPVG Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT162374CTPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162374CTPVG Flip Flops applications.
- Parallel data storage
- Digital electronics systems
- Memory
- Shift registers
- Pattern generators
- Counters
- Bus hold
- CMOS Process
- Frequency division
- Common Clocks
