74FCT162374ETPVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 500μA |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162374ETPVG Overview
As a result, it is packaged as SSOP. D latch consists of 2 elements. A total of 48 terminations have been made. A voltage of 5V provides power to the D latch. This D flip flop belongs to the family of FCT. Electronic part Surface Mountis mounted in the way. This board has 48 pins. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). There are 5V power supplies attached to it. The D flip flop is embedded with 2ports. Quiescent current is consumed by the D latch in the amount of 500μA. The high level output current is set to 24mA. It is set to 24mAfor low level output current. It is recommended that the operating temperature be below 85°C. It is recommended that the operating temperature is higher than -40°C. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. It uses a logic IC with a BUS DRIVER value. There are 2 functions available on this T flip flop. It is equipped with 48 pin count.
74FCT162374ETPVG Features
48 pins
5V power supplies
2 Functions
48 pin count
74FCT162374ETPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162374ETPVG Flip Flops applications.
- Shift Registers
- Digital electronics systems
- Count Modes
- Consumer
- ESD protection
- Load Control
- Modulo – n – counter
- CMOS Process
- Test & Measurement
- QML qualified product
