Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74FCT |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
HTS Code |
8542.39.00.01 |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74FCT162501 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
18-Bit |
Number of Ports |
2 |
Number of Bits |
18 |
Propagation Delay |
5.6 ns |
Family |
FCT |
Logic Function |
Transceiver |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
24mA 24mA |
Logic Type |
Universal Bus Transceiver |
Max I(ol) |
0.024 A |
Prop. Delay@Nom-Sup |
5.1 ns |
Trigger Type |
POSITIVE EDGE |
Control Type |
INDEPENDENT CONTROL |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height Seated (Max) |
1.2mm |
Length |
14mm |
Width |
6.1mm |
RoHS Status |
ROHS3 Compliant |
74FCT162501ATPACT Overview
There is an embedded version of it in the 56-TFSOP (0.240, 6.10mm Width) package. In the way of Tape & Reel (TR), it is packaged. A 18-Bit circuit is used for achieving its superior flexibility as a result of its use of 18-Bit circuits. A Universal Bus Transceiver is the logic type of the electrical device that we are discussing. In this case, the electronic part is mounted in the direction of Surface Mount. Operating temperatures should be higher than -40°C~85°C. The High/Low output current of 24mA 24mA makes it feature maximum design flexibility. As part of the 74FCT series, it is a type of FPGA. The supply voltage for the machine is 4.5V~5.5V and it operates on that voltage. The 74FCT162501 family includes it. It is possible to use 56 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. As a rule of thumb, the supply voltage should be maintained above 5V to ensure normal operation. The pin count is 56. A 18-Bit electronic part was designed for this application. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In this case, the electronic part will be mounted in the Surface Mount-direction. 56 pins are used in its design. Devices in this family are known as FCT devices. Upon reaching 5.5V, Vsup reaches its maximal value. It is recommended that the supply voltage (Vsup) should be greater than 4.5V. 5V power supplies are used to power it. POSITIVE EDGE is the trigger it is configured with. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design.
74FCT162501ATPACT Features
56-TFSOP (0.240, 6.10mm Width) package
74FCT series
74FCT162501 family
56 pin count
56 pins
5V power supplies
74FCT162501ATPACT Applications
There are a lot of Texas Instruments 74FCT162501ATPACT Universal Bus Functions applications.
- Networking
- Car
- Projector
- Various travel, camping, medical emergency appliances
- MPPT function (maximum power point tracking)
- Analog ICs
- Hair dryer
- Troubleshooting & Judgment
- Photovoltaic system
- Fishery-optical complementary power station