74FCT162501ATPVG
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 18 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 6 ns |
| Quiescent Current | 5μA |
| Family | FCT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Height Seated (Max) | 2.794mm |
| Length | 18.4mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
74FCT162501ATPVG Overview
It is embedded in the SSOP package. In 56 terminations, a transmission line is terminated with an impedance-matched device. As a rule of thumb, the supply voltage should be maintained above 5V to ensure normal operation. 56 pins are present in the device. In order to design this electronic part, 18 Bits have been used. The 2 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. The electronic part is mounted in Surface Mount-direction. 56 pins are used in the design of this board. The FCT family is made up of a number of electronic devices, one of which is this device, that belong to the genre of electronic devices. Power is provided by 5V power supplies. The element has a total of 1 elements. It is configured with a trigger that uses POSITIVE EDGE. This device is well suited for TUBE based on its reliable performance. In addition to this, WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION is another characteristic of it. Channels are growing strong/weak: 18. The electrical part in question operates with a voltage of 5V as a supply voltage. The device consumes 5μA of quiescent current without being affected by external factors. The minimal supply voltage is 4.5V. 5.5V's maximum supply voltage is supported by it. Current at high level 24mA is called the high level output current. It is recommended that the operating temperature be higher than -40°C. It is ideal for the operating temperature to be lower than 85°C.
74FCT162501ATPVG Features
SSOP package
56 pin count
56 pins
5V power supplies
1 elements
74FCT162501ATPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162501ATPVG Universal Bus Functions applications.
- Various travel, camping, medical emergency appliances
- In-vehicle system
- Electric grinding wheel
- Printer
- Server
- Car refrigerator
- Car
- Electricity for military and civilian life in areas without electricity
- Grid adaptation function
- Solar street light
