74FCT162511CTPVG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 500μA |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 16 |
| Prop. Delay@Nom-Sup | 4.2 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Height Seated (Max) | 2.794mm |
| Length | 18.4mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162511CTPVG Overview
Logical driver uses a neat SSOP package. All of the 1 elements are put into use. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the FCT family of parts. 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 16 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 500μA. It is recommended to use a 5V power supply. It is generally sold in TUBE package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct 24mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a REGISTERED BUS TRANSCEIVER logic IC. Logical driver adapts POSITIVE EDGE trigger.
74FCT162511CTPVG Features
Bus Driver/Transceivers
High Level Output: 24mA
Low Level Output: 24mA
REGISTERED BUS TRANSCEIVER Logic IC
Trigger Type: POSITIVE EDGE
74FCT162511CTPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162511CTPVG Buffers & Transceivers applications.
- Interconnection between switches and computers
- Sensor reporting
- Car radio
- Gigabit Ethernet
- Home theater wiring-free
- Tuner
- Remote controls
- Data center
- Satellite communications networks
- VoIP phones
