74FCT162823ATPACT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 18 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 10 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74FCT162823ATPACT Overview
The item is packaged in 56-TFSOP (0.240, 6.10mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74FCT series. The element count is 2 . There is a consumption of 500μAof quiescent energy. Terminations are 56. This D latch belongs to the family of 74FCT162823. A voltage of 5V is used to power it. A 4.5pFfarad input capacitance is provided by this T flip flop. Devices in the FCTfamily are electronic devices. It is mounted by the way of Surface Mount. A total of 56pins are provided on this board. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 18 Bits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The power supply is 5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be set to 5V. Featuring the maximum design flexibility, it has an output current of 24mA . In order to operate, the chip has 9 output lines.
74FCT162823ATPACT Features
Tape & Reel (TR) package
74FCT series
56 pins
18 Bits
5V power supplies
74FCT162823ATPACT Applications
There are a lot of Texas Instruments 74FCT162823ATPACT Flip Flops applications.
- Reduced system switching noise
- Common Clocks
- ESCC
- Consumer
- Asynchronous counter
- Load Control
- Modulo – n – counter
- Data Synchronizers
- 2 – Bit synchronous counter
- Buffer registers
