74FCT162841CTPVCG4
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20.5mA |
| Current - Output | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 15 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 5.5 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 20 |
| Height | 2.59mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74FCT162841CTPVCG4 Overview
The package in which it is embedded is named SSOP. Rail/Tube is the way it is packaged. Electronic parts with 10 bits are designed for this application. This device has been designed with 56 terminations available. In order to operate it, the supply voltage must be 5V. The device is equipped with 56 pins. This electronic device belongs to the family of FCT. 56 pins are used in its design. The electronic part is mounted using the Surface Mount method. 2 ports are available on this device. There is a subcategory of FF/Latches for this part. It operates from 5V power supplies. Electronic circuits comprise 20 input lines. A high level of efficiency is achieved by maintaining the supply voltage at 5V. The current consumed by the device is 500μA volts in quiescent mode, which cannot be affected by external factors. There are 2 elements in it. It has been set to 24mA for the low level output current. -24mA is set as the high level output current. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used as the operating temperature. It is capable of providing a maximum supply voltage of 5.5V. The minimal supply voltage is 4.5V. As for the logic IC it uses, it is a BUS DRIVER. With 24mA, maximum design flexibility is ensured.
74FCT162841CTPVCG4 Features
SSOP package
10 Bits
56 pin count
56 pins
5V power supplies
2 elements
74FCT162841CTPVCG4 Applications
There are a lot of Texas Instruments 74FCT162841CTPVCG4 Latches applications.
- Ring counter
- Serial Output Register
- Sample and hold register
- High-speed logic
- Pattern Generators
- Decade counting
- Shift left with parallel loading
- Phase comparator
- Parallel data storage
- Double bus register system
