74FCT162841CTPVCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162841 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20.5mA |
| Number of Bits | 20 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 5.5 ns |
| Number of Output Lines | 20 |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74FCT162841CTPVCT Overview
The package in which it is embedded is named 56-BSSOP (0.295, 7.50mm Width). As a result, it has a packaging of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. There is -40°C~85°C operating temperature. The 74FCT series is associated with this FPGA. With this electronic part, there are 20 bits. The device consists of 56 terminations that are designed to be used in conjunction with it. 74FCT162841 is the family name of it. In order to function, the supply voltage should be set to 5V. The 56 pind are equipped with it. FCT is the family of this electronic device. There are 56 pins on it. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. A total of 5V power supplies are needed to run it. This device is well suited for TAPE AND REEL based on its reliable performance. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It follows that 20 output lines are generated from the binary equivalent of the input line. A total of 2 elements make up this object.
74FCT162841CTPVCT Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
20 Bits
74FCT162841 family
56 pin count
56 pins
5V power supplies
2 elements
74FCT162841CTPVCT Applications
There are a lot of Texas Instruments 74FCT162841CTPVCT Latches applications.
- Pattern Generators
- Instrumentation
- Hammer
- Address register
- OC-48 communication systems
- Data acquisition
- Shift Registers
- Relay
- Decade counting 7-segment decimal display
- Hammer Device Information
