74FCT163244APFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Packaging | Rail/Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Family | FCT |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 4 |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163244APFG Overview
Logical driver uses a neat TFSOP package. Rail/Tube external packaging. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This buffer driver is part of the FCT family of parts. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. Logical driver features MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct -8mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a BUS DRIVER logic IC. It is sufficient to make 16 outputs.
74FCT163244APFG Features
Bus Driver/Transceivers
MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V
High Level Output: 8mA
Low Level Output: -8mA
BUS DRIVER Logic IC
74FCT163244APFG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163244APFG Buffers & Transceivers applications.
- Wireless transmission
- Fiber-to-the-desktop
- Satellite ground stations
- Data center
- Wireless smart house
- Cable network front end
- Fiber optic cable connection network
- Fast Ethernet
- interconnection between computers
- Automation systems
