74FCT163244CPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 4 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.8 ns |
| Family | FCT |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Control Type | ENABLE LOW |
| Number of Input Lines | 4 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163244CPAG Overview
Logical driver uses a neat TSSOP package. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. FCT family part. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. 4 bits are included within the electrical component. Logical driver features MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct -8mA of current. Voltage used to run voltage buffer should be 3V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Because of its 4 lines level input capability, buffer IC is more cost-effective on transimitting signals. It is known as a BUS DRIVER logic IC. It is sufficient to make 16 outputs.
74FCT163244CPAG Features
Bus Driver/Transceivers
MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V
High Level Output: 8mA
Low Level Output: -8mA
BUS DRIVER Logic IC
74FCT163244CPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163244CPAG Buffers & Transceivers applications.
- interconnection between computers
- Desktop radio
- LAN, SAN, WAN (local, storage, work area networks)
- Cordless telephone
- Remote controls
- Automation systems
- Metro access rings
- VoIP phones
- Data center
- IP cameras
