74FCT163245APAG
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 16 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Ports | 2 |
| Nominal Supply Current | 100nA |
| Propagation Delay | 4.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.2 ns |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | 24mA |
| Low Level Output Current | 8mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Number of Receivers | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
74FCT163245APAG Overview
Logical driver uses a neat TSSOP package. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This buffer driver is part of the FCT family of parts. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 10μA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. Logical driver features WITH DIRECTION CONTROL to better serve the need. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct 24mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a BUS TRANSCEIVER logic IC. Speaking of receivers, this voltage buffer has 2, which is reasonable for its cost.
74FCT163245APAG Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
High Level Output: 8mA
Low Level Output: 24mA
BUS TRANSCEIVER Logic IC
74FCT163245APAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163245APAG Buffers & Transceivers applications.
- Radio transmission
- transmission relay
- Precision engineering measurement
- Satellite radio receiver
- WDM transmission
- Low power, low voltage systems
- Portable radio
- Military satellite communications
- Fiber optic cable connection network
- LAN, SAN, WAN (local, storage, work area networks)
