74FCT163373APAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 8mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163373APAG Overview
The TSSOP package contains it. The design of this electronic part contains 16 bits. This device has been designed with 48 terminations available. With the supply voltage set at 3.3V, it is able to operate. 48 pins are provided. FCT is the family name of this electronic device. With the design of the board, there are only 48 pins. Surface Mount is the method used for mounting this electronic part. 2 ports are available on this device. This part can be found within the FF/Latches subcategory. The reliability of this device makes it well suited to TUBE. High efficiency requires maintaining the supply voltage at 3.3V. It also has characteristics of MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. It is set to zero for the low level output current. 24mA is the high level output current. There should be a temperature below 85°C at which the system is operating. A temperature greater than -40°C should be used as the operating temperature. There is a maximum voltage supply of 3.6V that can be applied to it. In order for the machine to operate, the supply voltage must be 2.7V. There is a logic IC BUS DRIVER used in the system.
74FCT163373APAG Features
TSSOP package
16 Bits
48 pin count
48 pins
74FCT163373APAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163373APAG Latches applications.
- Decade counting
- Serial Output Data Queuing
- Programmable binary
- Pseudo-random code generators
- Automotive Body Electronics
- Buffer Storage
- Up-Down Johnson
- Network Switches
- Parallel data storage
- Control circuits
