banner_page

74FCT163373APVG8

D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT163373APVG8
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 979
  • Description: D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 48
Qualification Status Not Qualified
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3/3.3V
Temperature Grade INDUSTRIAL
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current 24mA
Propagation Delay (tpd) 8.5 ns
Low Level Output Current 8mA
Independent Circuits 2
Length 15.9mm
Width 7.5mm
Thickness 2.3mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case SSOP
Number of Pins 48
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48

74FCT163373APVG8 Overview


In the SSOP package, it can be found as an embedded module. An electronic part with 8 bits is designed. The device consists of 48 terminations that are designed to be used in conjunction with it. The supply voltage of the device is 3.3V. It is equipped with 48 pin count. It is part of the family of electronic devices called FCT. There are 48 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports. The part is in the FF/Latches subcategory. 3.6V is the maximum supply voltage (Vsup). A total of 3/3.3V power supplies are required for it to operate. The device's reliable performance makes it a good choice for TAPE AND REEL. In addition, MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V characterize it. 8mA represents the low level output current. 24mA represents the high level output current. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. A BUS DRIVER logic IC is used.

74FCT163373APVG8 Features


SSOP package
8 Bits
48 pin count
48 pins
3/3.3V power supplies

74FCT163373APVG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT163373APVG8 Latches applications.

  • Watches
  • Parallel data synchronization
  • Parallel Output
  • Hammer
  • Lamp and Display (LED)
  • Counter
  • General-Purpose Register
  • Phase comparator
  • Automotive Infotainment
  • Parallel Input

Write a review

Note: HTML is not translated!
    Bad           Good