banner_page

74FCT163373CPAG

D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS TSSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT163373CPAG
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 337
  • Description: D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 48
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Number of Elements 2
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 2.7V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 2mA
Number of Bits 8
Propagation Delay 5.5 ns
Quiescent Current 10μA
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current -8mA
Low Level Output Current 24mA
Number of Input Lines 16
Length 12.5mm
Width 6.1mm
Thickness 1mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case TSSOP
Number of Pins 48
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V
Subcategory FF/Latches
Packing Method TUBE
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2

74FCT163373CPAG Overview


The TSSOP package contains it. Electronic parts with 8 bits are designed for this application. The device consists of 48 terminations that are designed to be used in conjunction with it. The device works with a voltage of 3.3V for its supply voltage. It is equipped with 48 pin count. This electronic device belongs to the family of FCT. It is designed with 48 pins. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. It contains 16 input lines where electronic circuits are present. As a result of its reliable performance, it is well suited for TUBE. The supply voltage should be maintained at 3.3V for high efficiency. Aquiescent current is consumed by 10μA without being affected by external forces. This object is composed of 2 elements. MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V are also a characteristic of it. 24mA represents the low level output current. There is -8mA output current at the high level. Ideally, the temperature should not be higher than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum supply voltage of 3.6V supported by this device. The minimal supply voltage is 2.7V. It uses the logic IC BUS DRIVER.

74FCT163373CPAG Features


TSSOP package
8 Bits
48 pin count
48 pins
2 elements

74FCT163373CPAG Applications


There are a lot of Integrated Device Technology (IDT) 74FCT163373CPAG Latches applications.

  • Audio and video switching
  • Automotive Body Electronics
  • Buffer Storage
  • Lamp and Display (LED)
  • Buffer/Storage Registers
  • Flip-flops
  • Stacked or Push-Down Registers
  • Hammer Device Information
  • Parallel Input
  • BCD counting

Write a review

Note: HTML is not translated!
    Bad           Good