74FCT163373CPAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3/3.3V |
| Temperature Grade | INDUSTRIAL |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Propagation Delay (tpd) | 5.5 ns |
| Low Level Output Current | 8mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163373CPAG8 Overview
It is embedded in the TFSOP package. As a result, it has a packaging of Tape & Reel (TR). There are 8 bits in this electronic part. This device has 48 terminations. In order to operate it, the supply voltage must be 3.3V. There are 48 pins on it. It is a member of the FCT family of electronic devices. It is designed with 48 pins. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. In the subcategory FF/Latches, this part belongs. During this period, the maximum supply voltage (Vsup) reaches 3.6V. The system is powered by 3/3.3V sources. As a result of its reliable performance, it is well suited for TAPE AND REEL. There are also characteristics of MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V associated with it. There is 8mA output current at the low level. 24mA is the high level output current. It is recommended that the operating temperature not exceed 85°C. It is recommended to operate at a temperature higher than -40°C. It uses the logic IC BUS DRIVER.
74FCT163373CPAG8 Features
TFSOP package
8 Bits
48 pin count
48 pins
3/3.3V power supplies
74FCT163373CPAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163373CPAG8 Latches applications.
- Buffer Storage
- Shift Registers
- Synchronous frequency dividers
- Decade counting 7-segment decimal display
- Serial Output Data Queuing
- Data acquisition
- Shift left register
- Counting
- TV Set-top Boxes
- Parallel Input
