Parameters |
Temperature Grade |
INDUSTRIAL |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Turn On Delay Time |
1.5 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
24mA |
Propagation Delay (tpd) |
5.5 ns |
Low Level Output Current |
8mA |
Independent Circuits |
2 |
Height |
2.3mm |
Length |
15.9mm |
Width |
7.5mm |
Thickness |
2.3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
48 |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3/3.3V |
74FCT163373CPVG8 Overview
In the SSOP package, it is embedded. Packaged in the way of Tape & Reel (TR). 8 Bits are used in the design of this electronic part. This device has been designed with 48 terminations available. With the supply voltage set at 3.3V, it is able to operate. 48 pins are available on it. In terms of electronic devices, this one is in the FCT family. The pin configuration of the device is 48. Surface Mount is the way in which this electronic part is mounted. In this device, there is a total of 2 ports available for use. There is a subcategory of FF/Latches for this part. There is a maximum voltage supply (Vsup) that reaches 3.6V. A total of 3/3.3V power supplies are required for it to operate. This device is well suited for TAPE AND REEL based on its reliable performance. There are also other characteristics of it, such as MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. 8mA is set as the low level output current. 24mA is set as the high level output current. A temperature below 85°C should be used for operation. It is recommended to operate at a temperature higher than -40°C. It uses a logic IC of type BUS DRIVER.
74FCT163373CPVG8 Features
SSOP package
8 Bits
48 pin count
48 pins
3/3.3V power supplies
74FCT163373CPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163373CPVG8 Latches applications.
- Buffer/Storage Registers
- Frequency
- Avionics
- Control circuits
- Shift right with parallel loading
- Registers
- Relay
- Parallel data storage
- Automotive ADAS
- Counters