74FCT16373ATPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16373ATPAG Overview
Package TSSOP includes it. There are 16 bits in this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. The device works with a voltage of 5V for its supply voltage. The device is equipped with 48 pins. FCT is the family name of this electronic device. The 48 pins are designed into it. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there are 2 ports. Subcategory FF/Latches includes this part. The device is powered by 5V power supplies. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It is also characterized by POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS. 64mA represents the low level output current. There is -32mA high level output current set. The operating temperature should be lower than 85°C. -40°C is the minimum operating temperature. There is a maximum supply voltage of 5.5V supported by this device. The minimal supply voltage is 4.5V. A BUS DRIVER logic IC is used.
74FCT16373ATPAG Features
TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT16373ATPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16373ATPAG Latches applications.
- Parallel Output
- Four-bit storage with output enable
- Parallel Input
- Display driver
- Shift register
- Shift right with parallel loading
- Hammer Device Information
- Serial Input
- PCs and Notebooks
- Buffer register
