74FCT16373ATPVCG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 16 |
| Height | 2.59mm |
| Length | 15.88mm |
| Width | 7.49mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16373ATPVCG4 Overview
The package in which it is embedded is named SSOP. Rail/Tube is the way it is packaged. With this electronic part, there are 8 bits. This device has been designed with 48 terminations available. A 5V voltage supply is required for operation. 48 pins are available on it. FCT is the family name of this electronic device. This board has 48 pins on it, which is what it is designed for. A Surface Mount mounting method has been used for this electronic part. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. There are electronic circuits attached to the 16 input lines. Optimal efficiency requires 5V as the supply voltage. The quiescent current consumed by it is 500μA because it is unaffected by external factors. This object is composed of 2 elements. 32mA is the low level output current. -32mA is the high level output current. A temperature below 85°C should be used for operation. -40°C is the minimum operating temperature. Voltages up to 5.5V can be supplied. With a minimum supply voltage of 4.5V, it operates. There is a logic IC that it uses that is a BUS DRIVER. Due to its 64mA output current, it offers maximum design flexibility.
74FCT16373ATPVCG4 Features
SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
2 elements
74FCT16373ATPVCG4 Applications
There are a lot of Texas Instruments 74FCT16373ATPVCG4 Latches applications.
- Bus system register with enable parallel lines at bus side
- Registers
- Serial Output Register
- Multistage ripple counting
- Shift Registers
- Buffer register
- Network Switches
- Clocks
- Phase comparator
- Parallel Input
