banner_page

74FCT16373ATPVG

D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT16373ATPVG
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 579
  • Description: D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case SSOP
Number of Pins 48
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 48
Operating Supply Voltage 5V
Polarity Inverting, Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 5μA
Number of Bits 8
Propagation Delay 8.5 ns
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.064 A
High Level Output Current -32mA
Low Level Output Current 64mA
Number of Input Lines 16
Independent Circuits 2
Length 15.9mm
Width 7.5mm
Thickness 2.3mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT16373ATPVG Overview


There is an embedded version of it in package SSOP. This electronic part is designed with 8 Bits. A device with this design has 48 terminations. In order to operate it, the supply voltage must be 5V. There are 48 pins on it. In the world of electronics, this electronic device belongs to the family of FCT. In addition, it is designed with a pin number of 48. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. It operates from 5V power supplies. Electronic circuits comprise 16 input lines. Based on its reliable performance, this device is suitable for TAPE AND REEL. In order to achieve high efficiency, the supply voltage should be kept at 5V. The superior flexibility of the system is achieved through its use of 1 circuits. There is 64mA low level output current set. There is -32mA output current at the high level. A temperature below 85°C should be used for operation. There should be a temperature above -40°C at which the device operates. 5.5V is the maximum voltage it supports. There is a minimum supply voltage of 4.5V for it. BUS DRIVER is the logic IC it uses.

74FCT16373ATPVG Features


SSOP package
8 Bits
48 pin count
48 pins
5V power supplies

74FCT16373ATPVG Applications


There are a lot of Integrated Device Technology (IDT) 74FCT16373ATPVG Latches applications.

  • Synchronous frequency dividers
  • Frequency dividing
  • Programmable binary
  • Avionics
  • Communication systems
  • Shift left with parallel loading
  • Timers
  • TV Set-top Boxes
  • Parallel data synchronization
  • Up-Down Johnson

Write a review

Note: HTML is not translated!
    Bad           Good