Parameters |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
16 |
Propagation Delay |
8.5 ns |
Turn On Delay Time |
1.5 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.064 A |
High Level Output Current |
64mA |
Low Level Output Current |
32mA |
Independent Circuits |
2 |
Length |
15.9mm |
Width |
7.5mm |
Thickness |
2.3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
48 |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
74FCT16373ATPVG8 Overview
In the SSOP package, it can be found as an embedded module. The design of this electronic part contains 16 bits. In this device, there are 48 terminations. In order to operate it, the supply voltage must be 5V. The device is equipped with 48 pins. In the world of electronics, this electronic device belongs to the family of FCT. In addition, it is designed with a pin number of 48. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. FF/Latches is the subcategory of this part. There is 5V power supply for it. As a result of its reliable performance, it is well suited for TAPE AND REEL. High efficiency requires a voltage supply of 5V. Additionally, it is characterized by POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS. 32mA is set as the low level output current. It is set to zero for the high level output current. It is recommended that the operating temperature not exceed 85°C. A temperature greater than -40°C should be used for operation. It is capable of providing a maximum supply voltage of 5.5V. The minimal supply voltage is 4.5V. As for the logic IC it uses, it is a BUS DRIVER.
74FCT16373ATPVG8 Features
SSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT16373ATPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16373ATPVG8 Latches applications.
- Programmable binary
- Digital bus buffer
- Shift left with parallel loading
- Shift left register
- Counters
- Four-bit storage with output enable
- Up-Down Johnson
- Buffer/Storage Registers
- A/D and D/A conversion
- Instrumentation