74FCT16373CTPAG
| Parameters | |
|---|---|
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 5μA |
| Number of Bits | 8 |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Inverting, Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
74FCT16373CTPAG Overview
TSSOP contains it. It is designed with 8 bits. As far as this device is concerned, it has no terminations. The supply voltage of the device is 5V. 48 pins are available on it. In terms of electronic devices, this one is in the FCT family. The device has 48 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. The system is powered by 5V sources. Electronic circuits comprise 16 input lines. For maximum efficiency, the supply voltage should be set to 5V. 1 circuits are used to provide this superior level of flexibility. 32mA is set as the low level output current. In the high level output current, the value is set to 64mA. Operating temperatures should be below 85°C. Temperatures higher than -40°C should be used for operation. It is capable of providing a maximum supply voltage of 5.5V. This device requires a minimum voltage of 4.5V. A BUS DRIVER logic IC is used.
74FCT16373CTPAG Features
TSSOP package
8 Bits
48 pin count
48 pins
5V power supplies
74FCT16373CTPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16373CTPAG Latches applications.
- Phase comparator
- Parallel data storage
- Digital bus buffer
- Stacked or Push-Down Registers
- Meter applications
- Parallel Input
- PCs and Notebooks
- Automatic test equipment
- Ring counter
- Automotive Cluster
