banner_page

74FCT16373CTPAG8

D-Type, Latch 16 Bits Latches 48 Pins DUAL CMOS TSSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT16373CTPAG8
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 834
  • Description: D-Type, Latch 16 Bits Latches 48 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Independent Circuits 2
Length 12.5mm
Width 6.1mm
Thickness 1mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case TSSOP
Number of Pins 48
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 48
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 16
Propagation Delay 4.4 ns
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.064 A
High Level Output Current 64mA
Low Level Output Current 32mA

74FCT16373CTPAG8 Overview


TSSOP contains it. This electronic part is designed with 16 Bits. A device such as this has 48 terminations designed. In order to function, the supply voltage should be set to 5V. There are 48 pins attached to it. It is part of the family of electronic devices called FCT. With the design of the board, there are only 48 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. The reliability of this device makes it well suited to TAPE AND REEL. High efficiency requires a voltage supply of 5V. In addition, POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS characterize it. 32mA is set as the low level output current. 64mA represents the high level output current. A temperature below 85°C should be used for operation. Temperatures higher than -40°C should be used for operation. It supports a maximum supply voltage of 5.5V. A minimal voltage of 4.5V is needed to operate it. It uses the logic IC BUS DRIVER.

74FCT16373CTPAG8 Features


TSSOP package
16 Bits
48 pin count
48 pins
5V power supplies

74FCT16373CTPAG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT16373CTPAG8 Latches applications.

  • Address register
  • Serial Output Register
  • Display driver
  • Stacked or Push-Down Registers
  • PCs and Notebooks
  • Relay
  • Audio and video switching
  • Network Switches
  • Sample and hold register
  • Storage

Write a review

Note: HTML is not translated!
    Bad           Good