74FCT16373CTPVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Polarity | Inverting, Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 5μA |
| Number of Bits | 8 |
| Propagation Delay | 4.4 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16373CTPVG Overview
The SSOP package contains it. An electronic part with 8 bits is designed. The device consists of 48 terminations that are designed to be used in conjunction with it. The device is operated when the supply voltage is set to 5V. It has 48 pins that makes it easy to use. It is a member of the FCT family of electronic devices. The pin configuration of the device is 48. It is mounted according to the Surface Mount method. This device has 2 ports. There is a subcategory of FF/Latches for this part. There are 5V power supplies required for this machine to operate. In the circuit, there are 16 input lines that are constituted by an electronic circuit. High efficiency requires a voltage supply of 5V. To achieve its exceptional flexibility, it relies on 1 circuits. 64mA represents the low level output current. In the high level output current, the value is set to -32mA. It is recommended to work at a temperature lower than 85°C. It is recommended that the operating temperature be higher than -40°C. Voltages up to 5.5V can be supplied. With a minimum supply voltage of 4.5V, it operates. As for the logic IC it uses, it is a BUS DRIVER.
74FCT16373CTPVG Features
SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
74FCT16373CTPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16373CTPVG Latches applications.
- Shift left register
- Automotive Cluster
- Stacked or Push-Down Registers
- Storage
- Shift left with parallel loading
- PCs and Notebooks
- Frequency
- Buffer/Storage Registers
- Automotive Body Electronics
- Shift right register
