74FCT16374ATPVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Height | 2.3mm |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16374ATPVG Overview
It is embeded in SSOP case. The list contains 2 elements. Terminations are 48. An input voltage of 5Vpowers the D latch. Electronic devices of this type belong to the FCTfamily. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 16bits in this flip flop. The D latch runs on a voltage of 5V volts. The D flip flop has no ports embedded. For high efficiency, the supply voltage should be set to 5V. In terms of quiescent current, it consumes 500μA . Additionally, you may refer to the additional POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS of the electronic flip flop. A -32mAis set for the high level output current. There is 64mA output current at the low level. There should be a temperature below 85°Cduring operation. A temperature above -40°Cshould be used for the operation. In order for it to operate, a supply voltage of 4.5Vis required. It is capable of supporting a maximum supply voltage of 5.5V. A frequency of 1MHzcan be achieved. The logic IC it adopts is BUS DRIVER. There are 2 functions associated with the JK flip flop. The JK flip flop has a pin count of 48.
74FCT16374ATPVG Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT16374ATPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16374ATPVG Flip Flops applications.
- CMOS Process
- Counters
- Load Control
- Matched Rise and Fall
- Storage registers
- Bounce elimination switch
- Event Detectors
- Parallel data storage
- Functionally equivalent to the MC10/100EL29
- Shift registers
