74FCT16374CTPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16374CTPAG Overview
The flip flop is packaged in a case of TFSOP. A total of 2elements are present in it. The number of terminations is 48. The D flip flop is powered by a voltage of 5V . The electronic device belongs to the FCTfamily. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. This flip flop is designed with 16 Bits. The D latch operates on 5V volts. The D flip flop has no ports embedded. For high efficiency, the supply voltage should be set to 5V. In terms of quiescent current, it consumes 500μA . It is also characterized by POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS. A -32mAis set for the high level output current. In the low level output current setting, the current is set to 32mA. It is recommended that the operating temperature be lower than 85°C. Ideally, the operating temperature should be higher than -40°C. In order for it to operate, a supply voltage of 4.5Vis required. It is capable of supporting a maximum supply voltage of 5.5V. It adopts a logic IC of type BUS DRIVER. It has 2 functions. The D latch is equipped with 48 pins.
74FCT16374CTPAG Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT16374CTPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16374CTPAG Flip Flops applications.
- Frequency division
- Parallel data storage
- ESD performance
- ATE
- Common Clocks
- Modulo – n – counter
- Pattern generators
- Safety Clamp
- Computing
- Single Down Count-Control Line
