74FCT16374ETPAG8
| Parameters | |
|---|---|
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 4.4 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
74FCT16374ETPAG8 Overview
The flip flop is packaged in a case of TSSOP. There are 2 elements in it. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is powered from a supply voltage of 5V. It belongs to the family of electronic devices known as FCT. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 48 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 16bits has been designed. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. The flip flop contains 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There is a consumption of 500μAof quiescent current from it. Furthermore, it has POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NSas a characteristic. -32mAis the output current at high level. There is 32mA output current at the low level. There should be a temperature below 85°Cduring operation. Operating temperatures should be above -40°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. A maximum voltage of 5.5V can be provided by it. BUS DRIVERis used as the logic IC in this D flip flop. It is equipped with 2 Functions . 48pins are available on this JK flip flop.
74FCT16374ETPAG8 Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT16374ETPAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16374ETPAG8 Flip Flops applications.
- Differential Individual
- Memory
- Clock pulse
- EMI reduction circuitry
- Shift Registers
- Parallel data storage
- Individual Asynchronous Resets
- Frequency Dividers
- Modulo – n – counter
- Reduced system switching noise
