74FCT16374ETPVG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 500μA |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16374ETPVG8 Overview
In the form of SSOP, it has been packaged. A total of 2 elements are present. It has been determined that there have been 48 terminations. Power is provided by a 5V supply. Devices in the FCTfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 5.5V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The power supply is 5V. A total of 2ports are embedded in the D flip flop. This D latch consumes 500μA quiescent current at all. As an additional reference, you may refer to electronic flip flop POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS. 64mA is set as the high level output current. It is set to 32mAfor the low level output current. Ideally, the operating temperature should be below 85°C. If the operating temperature is higher than -40°C, the system should operate properly. The minimal supply voltage is 4.5V. The logic IC it uses is BUS DRIVER. It is equipped with 2 Functions . It has 48 pins.
74FCT16374ETPVG8 Features
48 pins
5V power supplies
2 Functions
48 pin count
74FCT16374ETPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16374ETPVG8 Flip Flops applications.
- Power down protection
- Common Clocks
- Computers
- Test & Measurement
- Count Modes
- Memory
- Latch
- Buffer registers
- Registers
- Matched Rise and Fall
