74FCT164245TPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Polarity | Non-Inverting |
| Power Supplies | 3/3.35V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 16 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 1W |
| Number of Ports | 2 |
| Nominal Supply Current | 350μA |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 2mA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 64mA |
| Control Type | COMMON CONTROL |
| Translation | 3V & 5V |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT164245TPAG Overview
Logical driver uses a neat TSSOP package. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. There is a FCT family part that is attached to this electronic component. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 2mA. It is recommended to use a 3/3.35V power supply. It is generally sold in TUBE package. 8 bits are included within the electrical component. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS TRANSCEIVER logic IC. The fundamental operation of logical driver is based on 2 circuits.
74FCT164245TPAG Features
Bus Driver/Transceivers
High Level Output: 64mA
Low Level Output: -32mA
BUS TRANSCEIVER Logic IC
74FCT164245TPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT164245TPAG Buffers & Transceivers applications.
- interconnection between computers
- IP cameras
- Remote controls
- Wireless transmission
- SONET/SDH Network
- Telecom and datacom networking applications
- Solenoids
- Changeing the frequency from IF to RF
- LAN, SAN, WAN (local, storage, work area networks)
- Pocket PC
