74FCT16500CTPACTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16500 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 18-Bit |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.3 ns |
| Family | FCT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 23mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4.6 ns |
| Trigger Type | NEGATIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74FCT16500CTPACTE4 Overview
It is embedded in the 56-TFSOP (0.240, 6.10mm Width) package. I have packaged it in a way that is similar to Tape & Reel (TR)'s. Flexible 18-Bit circuits are used to achieve its superior performance. A Universal Bus Transceiver logic type is used in this electrical device. I have mounted this electronic part in the way of Surface Mount in this way. It is recommended that the operating temperature be higher than -40°C~85°C. As 23mA 64mA offers a high/low output current, it is versatile in terms of design. As part of the 74FCT series, it is a type of FPGA. The 74FCT16500 family is the one that this is part of. In 56 terminations, the transmission line is terminated with a device matching its characteristic impedance. Keeping the supply voltage above 5V is necessary for normal operation of the device. The pin count is 56. This electronic part is designed with 18 Bits. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In this case, the electronic part will be mounted in the Surface Mount-direction. 56 pins are used in the design of this board. This one belongs to the FCT family of electronic devices, and there are a number of other devices like it that are part of this family. 5V power supplies power it. NEGATIVE EDGE is the trigger configured with it. Based on its reliable performance, this device is well suited for TAPE AND REEL. 4.5V is the minimum supply voltage needed for it to operate. 5.5V's maximum supply voltage is supported by it.
74FCT16500CTPACTE4 Features
56-TFSOP (0.240, 6.10mm Width) package
74FCT series
74FCT16500 family
56 pin count
56 pins
5V power supplies
74FCT16500CTPACTE4 Applications
There are a lot of Texas Instruments 74FCT16500CTPACTE4 Universal Bus Functions applications.
- Troubleshooting & Judgment
- automatic temperature control circuits
- measuring instrument
- Fishery-optical complementary power station
- Disk read-write IC
- Roof distributed power station
- General AND Logic Operation
- Massager
- Mountain power station
- Illumination
