Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
56 |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
16 |
Number of Circuits |
2 |
Max Supply Voltage |
5V |
Min Supply Voltage |
4.5V |
Number of Ports |
2 |
Nominal Supply Current |
5μA |
Propagation Delay |
5.6 ns |
Quiescent Current |
5μA |
Turn On Delay Time |
7.8 ns |
Family |
FCT |
Logic Function |
Inverting, Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Logic IC Type |
REGISTERED BUS TRANSCEIVER |
Max I(ol) |
0.064 A |
Number of Bits per Element |
8 |
Prop. Delay@Nom-Sup |
5.1 ns |
High Level Output Current |
64mA |
Low Level Output Current |
32mA |
Control Type |
INDEPENDENT CONTROL |
Translation |
N/A |
Length |
14mm |
Width |
6.1mm |
Thickness |
1mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74FCT16543CTPAG Overview
Logical driver uses a neat TSSOP package. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Family FCT includes the buffer IC . 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 5μA. It is recommended to use a 5V power supply. Logical driver features INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH to better serve the need. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 32mA to its low level. In high level output mode, the electronic parts may conduct 64mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5V. It is known as a REGISTERED BUS TRANSCEIVER logic IC. The fundamental operation of logical driver is based on 2 circuits.
74FCT16543CTPAG Features
Bus Driver/Transceivers
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
High Level Output: 32mA
Low Level Output: 64mA
REGISTERED BUS TRANSCEIVER Logic IC
74FCT16543CTPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16543CTPAG Buffers & Transceivers applications.
- Carrier phase observations
- AV receiver
- VoIP phones
- Satellite radio receiver
- IPTV front end
- Switching system
- Wired telephone
- Wireless communication
- Fiber optic cable connection network
- Car radio